Tips For Troubleshooting Your Home Alarm System In Tallahassee
False alarms and system hiccups can be frustrating, and more importantly, might prevent your security system from working the way it should. Fortunately, most issues, from false alarms to dead batteries, are easy to correct. Take a look at our suggestions for troubleshooting your home alarm system in Tallahassee. We’ll help you keep your family members safeguarded and your system operating the way it should.
Test Your Home Security System In Tallahassee
One sensible way to troubleshoot your property’s security is to test it! Modern systems permit you to place them in test mode to keep you from initiating an emergency response from monitoring agents. After moving to test mode, follow these steps:
- Turn on your system as you normally would when leaving.
- Open a door or window that has a contact sensor, or try to set off another device. Shut the window or door once you’re done so it doesn’t prompt the alarm as you reactivate the system.
- Permit the alarm to resonate for 60 seconds to ensure communications with the security company and to make an entry in the alarm system log.
- Continue testing devices as you wish
- Inspect the systems’s activity log to verify that everything’s working.
Don’t worry, monitoring agents will be able to see that your alarm system is being tested. Be sure to switch out of test mode when complete. It’s a good idea to test monthly or whenever you make changes to your home’s internet or phone connectivity.
Inspect The Positioning And Condition Of Motion Sensors
Although an crucial part of your alarm system, motion detectors are prone to false alarms. Prevent them with some simple troubleshooting.
- Perform a physical inspection. Are there objects that could shift within the path of the sensor, like a window treatment taken by a breeze?
- Is the sensor dirty? Cobwebs, dirt, and debris can cause issues. Make sure the sensor is clean.
- Does the motion detector offer pet immunity you can activate? Some sensors can be programmed to disregard pets up to 100 pounds.
- When was the battery replaced? Low batteries may affect performance or result in false alarms.
- Is a heat source affecting the sensor? Excess heat from sunlight or a fireplace can cause an alarm.
Keep Batteries On Hand And Pay Attention To Low Battery Warnings
One of the great aspects of the latest home security systems is that they’ll alert you when batteries are running low. If your system has a control panel or mobile app, you’ll typically discover notifications there. Depending on your alarm, you might notice an intermittent beep when batteries are getting low.
Contact sensors, smoke detectors, motion sensors, and other wireless devices have batteries that should be replaced every 1 to 2 years. It’s a good idea to keep batteries on hand and set a replacement schedule. Many systems also have a rechargeable backup battery for the central control panel. This backup helps keep your system operating if your power goes out and should recharge once the electricity is working again. If it doesn’t recharge, you will need to replace it.
Troubleshooting Is Simple With ADT Home Security In Tallahassee
As the foremost name in home security, ADT creates systems that provide unsurpassed functionality and convenience. Getting into test mode is simple through the ADT+ app or MyADT.com, and you’ll always be sent notifications when a battery is nearing depletion. Contact Secure24 Alarm Systems, an authorized ADT dealer, to get more details and design a system ideal for your Tallahassee home and family. Call (850) 347-8092 or submit our form today!