Where To Place Carbon Monoxide Detectors In Your Tallahassee Property
Property owners must defend against numerous risks like fire, flooding, and burglary. But what about a risk that can’t be detected by human senses? Carbon monoxide is different from other threats as you might never be aware that it’s there. Despite that, implementing CO detectors can easily safeguard your family and property. Explore more about this dangerous gas and where to place carbon monoxide detectors in your Tallahassee home.
What Is Carbon Monoxide?
Referred to as the silent killer as of a result of its lack of color, odor, or taste, carbon monoxide is a common gas caused by incomplete fuel combustion. Any appliance that consumes fuels like a fireplace or furnace can create carbon monoxide. Although you normally won’t have any trouble, issues can arise when appliances are not routinely maintained or properly vented. These oversights could result in a build-up of this dangerous gas in your interior. Generators and heating appliances are commonly culpable for CO poisoning.
When in contact with minute amounts of CO, you may suffer from fatigue, headaches, dizziness nausea, or vomiting. Continuous exposure to high concentrations may lead to cardiorespiratory arrest, and even death.
Recommendations For Where To Place Tallahassee Carbon Monoxide Detectors
If your home doesn’t have a carbon monoxide detector, get one today. Preferably, you should have one on each level of your home, and that includes basements. Browse these tips on where to place carbon monoxide detectors in Tallahassee:
- Install them on every floor, specifically in areas where you use fuel-burning appliances, including fireplaces, furnaces, water heaters, and gas dryers.
- You should always use one within 10 feet of bedroom areas. If you only install one CO detector, this is where it should go.
- Place them about 10 to 20 feet from potential CO producing appliances.
- Do not affix them immediately above or beside fuel-utilizing appliances, as a small degree of carbon monoxide might be emitted when they turn on and trigger a false alarm.
- Fasten them to walls about five feet from the floor so they can sample air where people are breathing it.
- Avoid putting them in dead-air places and near doors or windows.
- Place one in areas above garages.
Inspect your CO detectors often and maintain them in accordance with manufacturer guidelines. You will generally have to replace them in six years or less. You should also make certain any fuel-burning appliances are in in good working condition and have adequate ventilation.